Laminate Flooring Installation in Melbourne

Having laminate flooring installed is mostly a question of what happens before the first board goes down. The floor underneath, the moisture in it, the way the boards are set out and where the joins land all decide whether the finished floor looks right and stays quiet underfoot for years.

Arta Floor installs laminate flooring across Melbourne. This page explains what our installation involves, what we check before we start, and what to expect on the day — so you know what you are getting when you hire someone to do it.

What Our Laminate Installation Includes

A complete laminate installation from us covers:

  • Measuring and assessing your floor — we look at the existing surface, check it for level and take moisture readings before anything is agreed.
  • Lifting and removing the old floor, including taking the waste away.
  • Preparing the surface underneath so it meets the tolerance the flooring manufacturer requires.
  • Laying the floor, including setting out the direction and planning where the joins and end cuts fall.
  • Finishing — skirting or scotia, thresholds where the floor meets another surface, and trims around door frames.
  • Cleaning up and leaving the room ready to use.

If you would rather understand the process in detail before deciding, our guide to how laminate flooring is laid walks through the method itself.

What We Check Before We Install

Is the floor flat enough?

Laminate is a floating floor — it is not fixed down, so it needs an even surface to sit on. Dips and humps lead to movement, gaps opening at the joins, and a hollow sound when you walk across it. We measure the deviation rather than judging it by eye.

How much moisture is in the floor underneath?

On a concrete slab this matters most. Moisture rising through a slab has nowhere to go once a floor is laid over it, and it shows up later as lifting or swollen board edges. We test rather than assume, and where a slab reads high we deal with it before laying. If your slab needs work first, see concrete floor levelling.

What is already on the floor?

Old adhesive, tiles, carpet gripper and paint all affect what has to happen first. This is usually where the difference between two quotes comes from — one has allowed for the removal and preparation, the other has not.

Do the doors and thresholds still work?

A new floor changes the height. Doors may need easing, and thresholds have to suit the floor on the other side. We check this before starting rather than discovering it at the end.

Laminate in Melbourne Homes

Melbourne moves through wide temperature and humidity swings, and a floating floor responds to that by expanding and contracting slightly. Two things follow from it:

  • The boards need time in the room before they are laid, so they settle to the conditions they will live in.
  • The floor needs room to move at the edges, kept out of sight under the skirting or scotia. A floor laid tight to the walls has nowhere to expand and will lift or buckle.

Older Melbourne homes add their own complications: timber subfloors that have settled unevenly, rooms that are not square, and existing floor levels that vary between rooms. These are worked out during the assessment, not on the day.

What to Expect on Installation Day

We ask you to clear the room of furniture and anything breakable beforehand, and to keep pets out of the working area. We need access to power and a space to cut, usually outside or in a garage.

A straightforward room is typically done in a day; a larger area, or one needing the old floor lifted and the surface prepared first, takes longer. We tell you which yours is when we quote, rather than leaving you to find out.

Laminate can normally be walked on as soon as it is finished — there is no curing time as there is with an adhesive-fixed floor. We will tell you if anything about your job changes that.

Laminate Flooring Installation — Common Questions

Do I need to remove my old floor first?

No — removal is part of what we do. Whether the old floor has to come up at all depends on what it is and what condition it is in, and we check that when we measure.

Can laminate go over an existing tiled floor?

Sometimes, if the tiles are sound, well bonded and the extra height works with your doors and the rooms next door. It needs checking on site.

How long will my room be out of use?

Usually the working day itself. You can walk on the floor once we finish, and move furniture back the same day in most cases.

Will there be a gap around the edges?

Yes, and it is meant to be there — it gives the floor room to move. It sits under the skirting or scotia, so you do not see it.

What if my floor is not level?

We bring it within tolerance before laying. How much work that needs depends on how far out it is, which is why we measure before quoting rather than after.

Do you install flooring I have bought elsewhere?

Yes. Tell us what you have and we will check it suits the room and the floor underneath.

Arrange a Laminate Flooring Installation Quote

Arta Floor is based in Northcote and installs laminate flooring across Melbourne. We measure the room, check the floor underneath and tell you what the job actually involves before you commit to anything.

Contact Arta Floor to arrange a measure and quote. You can also browse our laminate flooring range.

Areas we serve: Northcote · Alphington · Fairfield · Clifton Hill · Ivanhoe · Thornbury · Westgarth · Preston · Coburg · Brunswick · Carlton · Fitzroy · Collingwood · Abbotsford · Richmond · Kew · Hawthorn · Balwyn · Deepdene · Heidelberg · Melbourne CBD