Carpet Tile Installation in Melbourne
Carpet tiles are laid square by square rather than as one sheet, which makes them the usual choice for offices, shops and other spaces that stay in use. A damaged tile can be swapped instead of relaying a whole floor, and the work can be staged around people still using the room.
Arta Floor installs carpet tiles across Melbourne. This page explains what our installation involves, what we assess first and how we work around an operating space — so you know what you are getting when you hire someone to lay them.
What Our Carpet Tile Installation Includes
- Measuring and assessing the floor — the surface underneath, its condition and moisture readings where there is a slab.
- Lifting the existing floor covering and taking the waste away.
- Preparing the surface so the tiles bond properly and sit flat.
- Setting out the floor — where the pattern starts and which way the tiles face, which decides how the finished floor reads.
- Laying the tiles and fitting them around doorways, columns and edges.
- Finishing — thresholds and trims where the carpet meets another surface.
- Cleaning up and leaving the space ready to use.
If you want to understand the method itself, our guide to installing carpet tiles covers it in detail.
What We Assess Before Laying
The surface underneath
Carpet tiles are thin, so anything under them eventually shows through — ridges of old adhesive, lipped edges, holes and cracks. The surface has to be clean, sound and smooth before tiles go down, and that preparation is usually the difference between a floor that looks flat and one that does not.
Moisture, on a concrete slab
Most commercial carpet tile goes onto concrete. Moisture moving up through a slab affects the bond holding the tiles in place, which shows up later as tiles lifting at the corners or shifting underfoot. We test rather than assume, and deal with it first where a slab reads high — see concrete floor levelling.
What is already down
Old vinyl, an existing carpet with underlay, or a previous tile installation each change what has to happen first, and what the removal involves.
How the room is used
Entry areas, corridors and under-desk zones wear at different rates. It affects where the heavier wear will fall and is worth knowing before we set out the floor.
Laying Out the Floor — Why It Changes the Look
Carpet tiles have a direction. The same tile laid all one way, turned a quarter each time, or alternated gives three visibly different floors — from a broadloom-like finish to a deliberate chequer.
Where the setting-out starts matters too, because it decides where the cut tiles fall. Planned well, the cuts sit at the edges and under furniture; planned badly, a row of part-tiles lands in the middle of the room where everyone sees it. We agree the layout with you before starting rather than deciding it on the day.
Working in an Operating Space
Most carpet tile jobs are in places that cannot simply close — an office, a shop, a clinic. Tiles suit that, because the floor can be done in sections rather than all at once.
We can work in stages, area by area, so part of the space stays usable while the rest is laid. Out-of-hours work is often the simplest answer for a busy floor. Tell us how the space is used and we will plan the sequence around it.
You will need to clear furniture from the area being laid — we can advise how much has to move at each stage.
Carpet Tile Installation — Common Questions
Can you work around us while we stay open?
Usually yes. Carpet tiles lend themselves to staged work, so we lay one area at a time. Out-of-hours is also an option for busy spaces.
Can carpet tiles go over an existing hard floor?
Often, if it is sound, clean and smooth. Old adhesive ridges and lipped edges telegraph through thin tiles, so the surface usually needs preparing first. We check on site.
What happens if a tile is damaged later?
That is the advantage of tiles — a damaged one can be lifted and replaced without disturbing the rest. Keeping a few spare tiles from the same batch is worth doing.
Do carpet tiles need to be glued down?
It depends on the tile and the traffic. Some use a tackifier that holds them in place while still allowing removal, others are fixed more permanently. We confirm it for the product you have chosen.
How long will the floor be out of use?
It depends on the area and on how much preparation the floor needs. We tell you when we quote, including how it can be staged.
Can I supply my own tiles?
Yes. Tell us what you have and we will check it suits the space and the floor underneath.
Arrange a Carpet Tile Installation Quote
Arta Floor is based in Northcote and installs carpet tiles across Melbourne, in offices, shops and commercial spaces as well as homes. We look at the floor, the space and how it is used before telling you what the job involves.
Contact Arta Floor to arrange a measure and quote, or browse our carpet tile range.
Areas we serve: Northcote · Alphington · Fairfield · Clifton Hill · Ivanhoe · Thornbury · Westgarth · Preston · Coburg · Brunswick · Carlton · Fitzroy · Collingwood · Abbotsford · Richmond · Kew · Hawthorn · Balwyn · Deepdene · Heidelberg · Melbourne CBD